1·The recognition and evaluation of low resistivity oil layer is worldwide problem.
低阻油层的识别、评价与熟悉是世界性的困难。
2·Budate buried hill reservoir is the main oil layer of Sudeerte oilfield in Hailar Basin.
布达特潜山储层是海拉尔盆地苏德尓特油田的主力油层。
3·High formation water salinity reduces resistivity contrast between oil layer and water layer.
高矿化度的地层水，降低了油层与水层的电阻率对比度。
4·The model consists of perforation, wellbore, cement casing, oil layer, micro-annulus and transverse fracture.
模型中包括射孔孔眼、套管、水泥环、油层、微环隙和横向裂缝。
5·Zhongyuan oilfield is a high burial depth, high oil layer and types and inhomogeneous block faulted oilfield.
中原油田是一个埋藏深、含油气层系多、油藏类型多、非均质性严重的断块油气田。
6·Therefore, it is very difficult to distinguish oil with water layer and to evaluate oil layer by using logging data.
采用人工神经网络测井识别技术识别油层并进行储层物性及含油性的解释。
7·The chang 61 low permeable reservoir in Yanchang Formation in the Upper Triassic is the main oil layer in Wuqi area.
吴旗地区主力油层为上三叠统延长组长61，属于特低渗储层。
8·This method was simple, convenient and easy to calculate, the level of submerged oil layer could be identified with the logging curves.
该方法简单方便，计算量小，根据测井曲线即可判别出油层水淹级别。
9·The test results showed that this agent had a good plugging effect for water layer and no damage for oil layer and oil-water mixed layer.
试验表明，该堵剂对水层有较好的堵塞效果，不损害油层和油永混合层。
10·Powerful sole cleaner , can effectively remove bottom surface spray paint and oil layer, usable also do PU , PVC materials treatment agent.
强力鞋底清洁剂，可有效去除底材料表面的喷漆和油脂层，也可做PU、PVC材料处理剂。
1·For the light to be trapped in two dimensions, the object's surface needed to be smooth enough to cleanly reflect most of the light into the oil layer rather than scattering it at all angles.
要把光被捕获在两维的曲线状表面上时，要求物体表面非常平滑，才足以把大部分光线干净利落地反射进油层而不是分散在所有的各个角度上。
2·Light sent into the oil layer was confined there, bouncing between the metal and air boundaries. The beam spread out ever more quickly, generating a trumpet-shaped glow (see image).
当把光传入油层后，就被约束在那里，光线在金属和空气的边界之间不断反弹，于是产生了喇叭状的辉光(见图片)。
3·In the same condition, the lower the salinity of stratum-water and the stronger the additional conductivity influence, the easier the make of low resistance oil layer.
同等条件下，地层水矿化度愈低，附加导电作用愈强，愈容易形成低阻油层。
4·A bearing model for investigating the mechanism and form of bearing current is proposed, which simulates the bearing interior contact and oil layer breakdown.
为研究轴承电流产生机理及存在形式，建立模拟轴承内部接触和轴承油层击穿的轴承模型。
5·Method Using the height of oil layer in the centrifuged emulsion as evaluating criterion, the main factors that affect the stability of emulsion were selected by orthogonal design method.
方法采用正交设计法，以所制乳剂离心分层油层的高度为考察指标，对影响乳剂稳定的主要因素进行优选。